Focus L4-2.0L (2009)
5. NOTE: The cylinder block plug is located on the exhaust side of the engine block near the CKP sensor.
Remove the cylinder block plug.
6. NOTE: When the crankshaft contacts the Crankshaft TDC Timing Peg, the No. 1 cylinder will be at Top Dead Center (TDC).
Install the crankshaft TDC Timing Peg.
-
Turn the crankshaft clockwise until the crankshaft contacts the Crankshaft TDC Timing Peg.
7. Remove the CKP sensor retaining bolts and the sensor.
8. NOTICE: Only hand-tighten the bolt or damage to the front cover can occur.
Install a 6 mm x 18 mm standard bolt.
Installation
1. Install the CKP sensor, but do not tighten the 2 bolts at this time.