Focus L4-2.0L (2009)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
Removal and Installation
NOTE: For non-functional ignition lock cylinders, the steering column lock module has to be replaced.
1. Remove the Passive Anti-Theft System (PATS) transceiver.
2. Remove the ignition lock cylinder.
1. Insert and turn the ignition key to the ACC position.
2. Using a suitable tool, press the detent.
3. Remove the lock cylinder.
3. If a new lock cylinder with keys is replaced, the new PATS keys must be programmed.
4. To install, reverse the removal procedure.
