Focus L4-2.0L (2009)
6. Remove the spring.
1. Position the stabilizer bar aside.
2. Lower the rear lower control arm and remove the spring.
-
Inspect the spring upper and lower seats and, if necessary, install new.
Installation
1. NOTICE: Make sure the upper spring seat is installed, and the spring ends butt correctly against the upper and lower spring seats.
Install the upper spring seat onto the spring.
2. Install the spring.
1. Position the stabilizer bar aside.
2. Position the spring into the upper spring mount and position the lower arm.
3. NOTICE: Make sure the spring butts against the rear lower arm spring stop and is visible through the drain hole or spring and spring
seat damage may occur.
If necessary, rotate the spring clockwise until the spring-end butts against the rear lower arm spring stop.
