Focus L4-2.0L (2009)
3. Remove the Battery Junction Box (BJB) bolt.
4. Remove the BJB from the mounting bracket.
1. Detach the wiring harness retainer.
2. Release the BJB retainer clip and position the BJB aside.
5. NOTE: Cap the upper hydraulic and lower hydraulic supply tubes to prevent fluid loss.
Remove the clips, then disconnect the clutch hydraulic tubes.
6. Remove the instrument panel lower panel from the instrument panel.
1. Remove the screws.
2. Release the fastener.
7. Remove the instrument panel lower panel.
-
Detach the Data Link Connector (DLC).
-
Disconnect the hood release cable.
