Focus L4-2.0L DOHC VIN 3 (2002)
9. NOTE: Support the exhaust system with a suitable axle stand.
Detach the exhaust system from the crossmember exhaust hanger insulator.
^
Lower the exhaust system to give sufficient clearance from the crossmember.
10. Using a suitable transmission jack, support the crossmember.
11. Remove the crossmember (three bolts each side).
Installation
NOTE: Final tightening of the rear suspension components should be carried out at the design height setting.
All vehicles
1. Using a suitable transmission jack, locate the crossmember.
