Focus L4-2.0L DOHC VIN 3 (2002)
2. Install the crossmember (three bolts each side).
3. Lower and remove the transmission jack.
4. Attach the exhaust system to the crossmember exhaust hanger insulator.
^
Remove the axle stand.
5. NOTE: Do not fully tighten the upper arm retaining bolts at this stage.
NOTE: Wagon shown, 3-door, 4-door and 5-door similar.
Install the upper arms.
6. NOTE: Do not fully tighten the upper arm to wheel knuckle retaining bolts at this stage.
Attach the upper arms to the wheel knuckles.
