Focus L4-2.0L DOHC VIN 3 (2002)
Seat Latch: Service and Repair
Rear Seat Backrest Latch - 3-Door and Wagon
REMOVAL
1. Disassemble the rear seat backrest.
2. Detach the retractor lock cable.
NOTE: Note the routing of the retractor lock bowden cable when removing to aid installation.
3. Remove the backrest latch.
^
Remove the screws.
INSTALLATION
1. To install, reverse the removal procedure.
CAUTION: Check the operation of the safety belt retractor, the cable routing and latch interlock operation before fully assembling the rear seat
backrest.
