Focus L4-2.0L DOHC VIN 3 (2002)
Brake Rotor/Disc: Service and Repair
Front
Brake Disc
Removal
NOTE: The brake lining is engineered to machine the brake disc surface during vehicle usage. It should not be necessary to machine the brake disc
when replacing the brake pads.
1. Raise and support the vehicle.
2. Remove the wheel.
3. Detach the outer brake pad retaining clip.
4. Detach the brake hose from the support bracket.
5. NOTE: Pull the caliper outwards to release the piston.
Detach the caliper.
1
Remove the bolt covers.
2
Remove the bolts.
6. CAUTION: Suspend the caliper to prevent load being placed on the brake hose.