Focus L4-2.0L DOHC VIN 3 (2002)
13. Remove the steering wheel rotation sensor retaining screws.
14. Remove the steering wheel rotation sensor.
Installation
1. WARNING: Do not install a new steering wheel rotation sensor, if the locking pin has been removed. Failure to follow this instruction
may result in personal injury.
WARNING: Before fitting the steering wheel rotation sensor, make sure the rotor is in the correct position. Failure to follow this
instruction may result in personal injury.
Check that the alignment indicator is in the correct position.
2. WARNING: Make sure the steering wheel rotation sensor retaining clamp screws are not over tightened. Failure to follow this
instruction may result in personal injury.