Focus L4-2.0L DOHC VIN 3 (2002)
Lubricate the camshaft and camshaft bearing cans with engine oil.
4. NOTE: Screw in the camshaft bearing cap bolts evenly, in the sequence shown, a half turn at a time and tighten them in two stages.
Tighten the bolts of the camshaft bearing caps.
^
Stage 1: 10 Nm
^
Stage 2: 19 Nm
5. Install the camshaft oil seals.
^
Lubricate the camshaft and oil seal lip with engine oil.
^
Using the special tool install a new oil seal.
NOTE: Do not tighten the bolts. The camshaft timing pulleys must be able to turn freely on the camshafts.
^
Install the camshaft timing pulleys.
6. Install the timing belt.
7. Lower the vehicle.
8. Attach the accelerator cable and the speed control cable (if equipped).
