Focus L4-2.0L DOHC VIN 3 (2002)
Valve Spring: Service and Repair
Zetec
Valve Springs
Removal
1. Remove the valve tappets.
2. WARNING: Always wear protective goggles when working with compressed air. This can prevent injury. Failure to follow these
instructions may result in personal injury.
Using special tools, remove the valve springs.
^
Apply compressed air to the cylinders.
^
Compress the valve springs and remove the valve collets.
^
Remove the valve spring retainers and the valve springs and place them in order to one side. To remove the collets use some grease and a
small screw driver.
Installation
