Focus L4-2.0L DOHC VIN 3 (2002)
Intake Manifold: Service and Repair
Zetec
Intake Manifold
Removal
1. Release the fuel pressure.
2. Unfasten the cable ties if necessary and install new ones when reinstalling.
3. Remove the generator.
4. Remove the air cleaner housing.
1. Pull off the mass air flow (MAF) sensor connector.
2. Detach the crankcase ventilation hose.
3. Detach the intake hose.
^
Pull out the air cleaner housing from the rubber bushings.
5. Detach the accelerator cable and the speed control cable (if equipped) from the throttle body.
6. Remove the fuel pressure sensor.
7. Detach the EGR valve and the EGR pipe bracket.