Focus L4-2.0L DOHC VIN 3 (2002)
Lubricate the camshaft and camshaft bearing caps with engine oil.
4. NOTE: Screw in the camshaft bearing cap bolts evenly, in the sequence shown, a half turn at a time and tighten them in two stages.
Tighten the bolts of the camshaft bearing caps.
^
Stage 1:10 Nm.
6
Stage 2:19 Nm
5. Install the camshaft oil seals.
^
Lubricate the camshaft and oil seal lip with engine oil.
^
Using the special tool install a new oil seal.
NOTE: Do not tighten the bolts. The camshaft timing pulleys must be able to turn freely on the camshafts.
^
Install the camshaft timing pulleys.
6. Install the timing belt. For additional information, refer to Timing Belt.
7. Lower the vehicle.
8. Attach the accelerator cable and the speed control cable (if equipped).
