Focus L4-2.0L DOHC VIN 3 (2002)
26. Install the crankshaft pulley.
27. NOTE: Direction of travel on a used drive belt.
Install the drive belt.
1. Attach the multi-groove belt idler pulley.
^
Attach the coolant pump pulley. Do not tighten the bolts at this stage.
2. Install the drive belt by turning clockwise and tension it.
3. Tighten the bolts on the coolant pump pulley.
28. Attach the drive belt cover.
29. Lower the vehicle.
30. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its
adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
Standard finishing operations:
^
Connect the battery negative cable.
^
Install the battery cover.
^
Check fluid levels and correct if necessary.
^
Check the routing of vacuum hoses and cables and secure them with cable ties.
