Focus L4-2.0L DOHC VIN 3 (2002)
Install the valve cover.
1. Tighten the bolts in two stages.
^
Stage 1: 2 Nm
^
Stage 2: 7 Nm
2. Attach the PCV hose to the valve cover.
^
Connect the VCT actuator electrical connector.
3. Coat the spark plug thread with Never Seeze, screw in the spark plugs and push in the spark plug connector until it encases.
16. Install the engine upper cover.
17. Install the electronic ignition (El) coil cover.
18. NOTE: Position the upper timing belt cover and the center timing belt.
Install the engine front mount bracket.
19. NOTE: Check the seating of the timing belt upper cover gasket and correct as necessary.
Attach the timing belt upper cover.
