Focus L4-2.0L DOHC VIN 3 (2002)
Position a new timing belt in place.
^
Starting from the crankshaft timing belt pulley and working counterclockwise, position the timing belt in place while keeping it under tension.
5. CAUTION: Incorrect timing belt tension will cause incorrect valve timing.
Pre tension the timing belt.
1. Rotate the tensioner locating tab counterclockwise and insert the locating tab into the slot in the rear timing cover.
2. Position the hex key slot in the tensioner adjusting washer to the 4 o'clock position.
3. Tighten the attaching bolt enough to seat the tensioner firmly against the rear timing cover, but still allow the tensioner adjusting washer to be
rotated, using a 6mm hex key.
6. CAUTION: Tension the timing belt, working counterclockwise.
Using the hex key, rotate the adjusting washer counterclockwise until the notch in the pointer is centered over the index line on the locating tab
(the pointer will move clockwise during adjustment).
