Focus L4-2.0L DOHC VIN 3 (2002)
6. Disconnect the evaporative emission canister tube and remove the canister and bracket.
7. Remove the evaporative emission canister from the bracket.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carry out the Leak Test. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission System Leak Test
^
Carry out the Evaporative Emission Repair Verification Drive Cycle. See: Testing and Inspection/Component Tests and General
Diagnostics/Evaporative Emission Repair Verification Drive Cycle
NOTE: A canister and bracket assembly leak test should be carried out before installation on the vehicle.
