Focus L4-2.0L DOHC VIN 3 (2002)
Remove the locking pin.
7. WARNING: Make sure the air bag sliding contact is centralized before installing. Failure to follow this instruction may result in
personal injury.
Centralize the air bag sliding contact.
1
Turn the air bag contact in a COUNTERCLOCKWISE direction until a resistance is felt (approximately 2.5 turns from the central position).
2
Turn the air bag sliding contact CLOCKWISE 2.5 turns until the arrow marked on the center of the sliding contact aligns with the raised V
section at the 12 o'clock position on the outer cover of the sliding contact. The sliding contact is now centralized.
8. CAUTION: Make sure the spacing collar is correctly located. Do not assemble if the spacing collar is missing.
Install the air bag sliding contact.
^
Make sure both the retaining tangs lock into position on the steering column.
