Focus L4-2.0L DOHC VIN 3 (2002)
4. Using the special tools, align the crossmember.
1. Insert the guide pins through the crossmember aligning holes.
2. Slide the locking plates into the grooves and tighten the guide pin sleeve.
3. Raise the crossmember, engaging the guide pins into the chassis aligning holes.
5. Install the crossmember bolts.
6. Remove the transmission jack.
7. Remove the subframe alignment pins.
8. Install the power steering hoses.
1. Rotate the clamp plate.
2. Install the bolt.
9. Install the hose support clamp.