Focus L4-2.0L DOHC VIN 3 (2002)
4. Install the spring.
Rear Lower Arm
Rear Lower Arm
Removal
1. Set the suspension to the design height setting.
2. Mark the position of the rear lower arm adjustment cam to the crossmember.
3. NOTE: Wagon shown, 3-door, 4-door and 5door similar.
Remove the rear lower arm.
Installation
NOTE: Final tightening of the rear suspension components should be carried out at the design height setting.
Wagon
1. NOTE: Do not fully tighten the rear lower arm to wheel knuckle bolt at this stage.
NOTE: Align the mark on the rear lower arm adjustment cam to the mark on the crossmember.
Install the rear lower arm.
