Focus L4-2.0L DOHC VIN 3 (2002)
Shifter A/T: Service and Repair
Selector Lever
Selector Lever
Disassembly
1. NOTE: Use vise jaw protectors for all work to be done in the vise.
Disconnect the Overdrive (O/D) switch electrical connector.
2. Remove the selector lever knob. Remove the screw.
3. Disassemble the selector lever. Pull off the tappet. Unclip the bezel.
Assembly
1. To assemble, reverse the disassembly procedure.
-
Coat all sliding and turning parts with grease.
