Focus L4-2.0L DOHC VIN 3 (2002)
Clutch Slave Cylinder: Service and Repair
Vehicles With MT285/MTX-75/Manual Transaxle
Clutch Slave Cylinder
Removal
1. Remove the transaxle.
2. CAUTION: If brake fluid is split on the paintwork, the affected area must be immediately washed down with cold water.
Remove the clutch slave cylinder.
Installation
1. NOTE: Install a new clutch slave cylinder and O-ring seal.
Using sealer, install the clutch slave cylinder.
2. Install the transaxle.
