Focus L4-2.0L DOHC VIN 3 (2002)
13. Remove the sun visor retaining clips.
1. Open the covers.
2. Remove the screws.
14. Detach the leading edge of the headliner and place two blocks of suitable material between the headliner and the roof opening to act as spacers.
15. From inside the vehicle, using a suitable direct glazing cutter, cut the PU adhesive to the given maximum depths.
1. 23 mm.
2. 75 mm.
3. 160 mm.
WARNING: WEAR GLOVES AND EYE PROTECTION WHEN WORKING WITH THE GLASS CUTTING TOOL AS THE
CUTTING OPERATION MAY PRODUCE SPLINTERS. WHEN USING THE CUTTER WEAR EAR PROTECTORS. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CAUTION: Make sure the cutting blades are changed where the cutting depth changes to avoid damage to the body and trim panels.
NOTE: Some resistance may be encountered when cutting through the glass locating pegs in the lower corners of the glass.
