Focus L4-2.0L DOHC VIN 5 (2003)
4. Adjust the right-hand cable guide pin.
-
Using a suitable screwdriver, move the cable in the direction required.
5. Install the roof opening panel guide arm covers
6. Connect the roof opening panel motor electrical connector (headliner shown removed for clarity).
7. Connect the roof opening panel motor control switch electrical connector.
8. CAUTION: This step must be carried out if re-installing a previously used roof opening panel motor.
NOTE: This step is not necessary when installing a new roof opening panel motor.
Carry out the Erasing Roof Opening Panel Motor Initialization procedure.
