Focus L4-2.0L DOHC VIN 5 (2003)
4. Remove the pedal position switches.
1
Speed control deactivation switch (colored green) (if equipped).
2
Stop lamp switch (colored grey).
5. Remove the brake booster retaining nuts (clutch position switch bracket shown removed for clarity).
6. Detach the brake booster actuating rod from the brake pedal.
1
Depress the brake pedal.
2
Depress the clip.
3
Remove and discard the brake booster actuating rod pin.
7. Remove the brake pedal retractor arm retaining bolt.
^
Remove the air duct, if necessary.
8. Remove the brake pedal bracket.
Installation
1. NOTE: Make sure the brake pedal locates into the brake booster actuating rod clevis.
Install the brake pedal bracket.