Focus L4-2.0L DOHC VIN 5 (2003)
Vehicles built 01/1999 onwards
3. NOTE: Do not fully tighten the brake pedal retractor arm retaining bolt at this stage.
Install the brake pedal retractor arm retaining bolt.
4. CAUTION: Make sure there is clearance between the brake pedal and the brake pedal retractor to allow free movement.
Align the brake pedal retractor arm to the brake pedal bracket.
All vehicles
5. Tighten the brake booster retaining nuts (clutch position switch bracket shown removed for clarity).
Vehicles built 01/1999 onwards
6. Tighten the brake pedal retractor arm retaining bolt.
^
Install the air duct, if necessary.