Focus L4-2.0L DOHC VIN 5 (2003)
Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir
Removal
All Vehicles
1. CAUTION: If brake fluid is spilled on the paintwork, the affected are must be immediately washed down with cold water.
Disconnect the electrical connector from the filler cap.
1
Pull back the tab.
2
Depress the clips.
3
Disconnect the electrical connector.
2. CAUTION: Make sure the filler cap does not become contaminated.
Remove the brake fluid reservoir filler cap.
3. Using a suitable clean suction device drain the reservoir.
4. Install the brake fluid reservoir filler cap.