Focus L4-2.0L DOHC VIN 5 (2003)
2. Draw in the oil seal.
^
Push in the oil seal using the special tool and two flywheel bolts.
3. NOTE: Clear the remainder of the locking compound from the crankshaft threaded holes.
NOTE: Use new bolts.
Attach the flywheel.
4. NOTE: Apply a layer of high-temperature grease. This should be so thin that no grease is expelled from the splines when the clutch disc is pushed
on to the transmission input shaft.
Lubricate the clutch disc engagement splines evenly all over with high-temperature grease.
5. Center the clutch disc on the clutch pressure plate.
