Focus L4-2.0L DOHC VIN 5 (2003)
10. Remove and discard the O-ring seals.
INSTALLATION
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE VAPORS ARE ALWAYS PRESENT AND MAY IGNITE. FAILURE TO
FOLLOW THIS INSTRUCTION MAY RESULT IN PERSONAL INJURY.
CAUTION: Do not use silicone grease to lubricate O-ring seals as it will block the fuel injectors.
1. To install, reverse the removal procedure.
^
Lubricate the fuel injector O-ring seals with clean engine oil to aid installation.
NOTE: Install new O-ring seals.
