Focus L4-2.0L DOHC VIN 5 (2003)
Fuel Rail: Service and Repair
SVT
REMOVAL
WARNING:
^
DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY
FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE VAPORS ARE ALWAYS PRESENT AND MAY IGNITE. FAILURE TO
FOLLOW THIS INSTRUCTION MAY RESULT IN PERSONAL INJURY.
^
THIS PROCEDURE INVOLVES FUEL HANDLING. BE PREPARED FOR FUEL SPILLAGE AT ALL TIMES AND ALWAYS
OBSERVE FUEL HANDLING PRECAUTIONS. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL
INJURY.
1. Release the fuel system pressure.
2. Disconnect the battery ground cable.
3. Disconnect the vehicle speed control cable (if equipped).
1. Disconnect the inner cable from the throttle body.
2. Detach the vehicle speed control cable from the throttle body.
4. Disconnect the accelerator cable.
1. Remove the retaining clip and disconnect the inner cable from the throttle body.
2. Rotate the outer cable.
3. Detach the accelerator cable from the throttle body.
5. Remove the air cleaner outlet tube.
