Focus L4-2.0L DOHC VIN 5 (2003)
Throttle Body: Service and Repair
Zetec
REMOVAL
CAUTION: Do not attempt to clean the throttle body. The bore and the throttle plate have a special coating applied during manufacture which should
not be removed.
Vehicles built up to 08/2002
1. Disconnect the accelerator cable.
1
Remove the accelerator cable retaining clip.
2
Disconnect the accelerator cable.
2. Detach the accelerator cable from the bracket.
1
Rotate the accelerator cable to release.
2
Detach the accelerator cable.
3. Detach the speed control cable from the throttle body (if equipped).
