Focus L4-2.0L DOHC VIN 5 (2003)
Throttle Position Sensor: Service and Repair
REMOVAL
NOTE: 2.3L engine shown, 2.0L engines similar.
All vehicles
1. Disconnect the battery ground cable.
2. Remove the air cleaner outlet pipe.
^
Loosen the outlet pipe retaining clamps.
^
Release the emission breather tube from the outlet pipe.
^
Remove the air cleaner outlet pipe.
Vehicles with 2.3L engine
3. Disconnect the fuel injector wiring harness electrical connector.
All vehicles
4. Remove the Throttle Position (TP) sensor.
1
Disconnect the TP sensor electrical connector.
2
Remove the TP sensor retaining screws.
3
Remove the TP sensor.
INSTALLATION
1. To install, reverse the removal procedure.