Focus L4-2.0L DOHC VIN 5 (2003)
Clockspring Assembly / Spiral Cable: Vehicle Damage Warnings
CAUTION:
^
Make sure the road wheels are in the straight ahead position.
^
Note the position of the spacing collar within the center of the air bag sliding contact.
^
Make sure the spacing collar is correctly located. Do not assemble if the spacing collar is missing.
^
A new clockspring is supplied pre-centralized and sealed with a red sealing key. If a new clockspring is installed break-off the red sealing key. If
an existing clockspring is being installed, carry out the centralizing procedure.
^
An audible click will be heard when the locking tangs are fully engaged.
^
Do not rotate the new clockspring between breaking the red sealing key and installing the steering wheel. If the vehicle is left unattended by the
technician between breaking the red seal and installing the steering wheel, carry out the centralizing procedure.
^
If the vehicle is left unattended by the technician between centralizing the clockspring and installing the steering wheel, the centralizing procedure
must be repeated.
