Focus L4-2.0L DOHC VIN 5 (2003)
5. NOTE: Do not fully tighten the upper arm retaining bolts at this stage.
NOTE: Wagon shown, 3-door, 4-door and 5-door similar.
Install the upper arms.
6. NOTE: Do not fully tighten the upper arm to wheel knuckle retaining bolts at this stage.
Attach the upper arms to the wheel knuckles.
7. NOTE: Do not fully tighten the front lower arm retaining bolts at this stage.
Install the front lower arms.
8. NOTE: Do not tighten the rear lower arm retaining bolts at this stage.
NOTE: Wagon shown, 3-door, 4-door and 5-door similar.
Install the rear lower arms.
9. Set the suspension to the design height setting.
