Focus L4-2.0L DOHC VIN 5 (2003)
12. Remove the center console lower trim panels (left-hand side shown).
^
Remove the screws.
^
Release the clip.
13. Remove the heater housing cover (right-hand side shown).
^
Unclip the four clips.
^
Remove the two screws.
14. Detach the floor covering and the insulator material and position it to one side (heat exchanger shown removed).
15. Attach a suitable length of draw cord to the transaxle end of the selector lever cable and secure it to the transaxle.
16. Remove the selector lever cable grommet.
17. Remove the selector lever cable.
^
Pull the cable and draw cord through the floor panel.
Installation
