Focus L4-2.0L DOHC VIN 5 (2003)
1. Attach the draw cord to the transaxle end of the selector lever cable.
2. Pull the selector lever cable through the floor panel.
3. Install the selector lever cable grommet.
4. Secure the insulator material and the floor covering with adhesive tape (head exchanger shown removed).
5. Install the heater housing cover (right-hand side shown).
^
Locate the four clips.
^
Install the two screws.
6. Install the center console lower trim panels (left-hand side shown).
^
Install the clip.
^
Install the screws.