Focus L4-2.0L DOHC VIN 5 (2003)
Valve Body: Service and Repair
Main Control
Removal
1. Remove the fluid pan.
2. Disconnect the Transmission Fluid Temperature (TFT) sensor electrical connector.
3. Remove the fluid filter.
4. NOTE: It is necessary to note the location of the main control wire harness connectors so they can be connected in the same positions. Connector
color letters are cast into the solenoid body. Remove the ground wire bolt.
Disconnect the electrical connectors and remove the main control wiring harness.
1
Solenoid SSC; Color N (Neutral/White).
2
Solenoid SSE; Color G (Green).
3
Solenoid SSD; Color L (Blue).
4
Solenoid EPC; Color B (Black).
5
Solenoid SSA: Color N (Neutral).
6
Solenoid SSB; Color B (Black).