Focus L4-2.0L DOHC VIN 5 (2003)
6. Remove the shift and selector cable.
^
Remove the shift and selector cable end fittings from the shift and selector lever.
^
Remove the shift and selector cable from the bracket by turning the lower part of abutment clockwise and the upper part counter clockwise.
7. Lower the vehicle.
8. Remove the healer air passage.
9. Open up the carpet and damping matting and fold it to one side (heater heat exchanger not shown).
10. Remove the shift and selector cable bushing from the floor pan and pull the cables through to the vehicle interior (heater heat exchanger not
shown).
Installation
1. Install the components in reverse order.
