Focus L4-2.0L SOHC VIN P (2000)
3. Install the EVAP emission canister.
4. Attach the vent pipes.
5. Connect the EVAP emission canister vent solenoid electrical connector.
All Vehicles
6. Install the exhaust system.
7. NOTE: Do not lower the suspension from the design height.
Install the upper arms.
8. NOTE: Do not lower the suspension from the design height.
Install the front lower arms.
9. NOTE: Do not lower the suspension from the design height.
Install the rear lower arms.
10. Install the stabilizer bar.
11. Check the rear wheel alignment.