Focus L4-2.0L SOHC VIN P (2000)
8.
NOTE: A single syringe of latch grease contains enough material for one (1) vehicle. The syringe is marked indicating the amount of grease to be
applied to each door latch. See Figure 7.
Apply approximately one (1) unit of grease (one graduation mark on the syringe) into the same square opening used for application of the spray
lubricant. See Figure 8.
9.
Open the latch using either the inside or outside door handle.
10.
Cycle the door 5-10 times to circulate the grease around the latch mechanism.
11.
Wipe any excess grease from around the latch and from the striker.
