Focus L4-2.0L SOHC VIN P (2000)
Using a screwdriver, fully close the latch (two clicks). See Figure 4.
^
If the latch will not fully close (does not click twice), it must be replaced. Any replacement latch must still have the cleaning and lubrication
procedure performed. Go to Door Latch Cleaning and Lubrication after a failed latch is replaced. Refer to the Rear Door Latch Replacement
procedure in the appropriate model year Focus Workshop Repair Manual Section 501-14 for repair instructions.
3.
Without touching either door handle, attempt to open the latch by pulling the latch mechanism with the screwdriver acting as the door striker. See
Figure 5.
^
Any door latch that does not open PASSES the inspection. Go to Door Latch Cleaning and Lubrication.
^
Any door latch that opens FAILS the inspection and must be replaced. Any replacement latch must still have the cleaning and lubrication
procedure performed. Go to Door Latch Cleaning and Lubrication after a failed latch is replaced. Refer to the Rear Door Latch Replacement
procedure in the appropriate model year Focus Workshop Repair Manual Section 501 - 14 for repair instructions.
NOTE:
It is necessary to only replace a latch(es) that fails (opens) during this inspection.
