Focus L4-2.0L SOHC VIN P (2000)
Brake Drum: Service and Repair
Brake Drum
Removal
All Vehicles
CAUTION: The brake drum removal in this procedure is for access to brake system components, not for installing a new brake drum
NOTE: To install a new brake drum, refer to Wheel Hub See: Maintenance/Wheels and Tires/Wheel Hub/Service and Repair
1. Release the parking brake.
2. Remove the wheel and tire.
Vehicles with anti-lock brakes
3. Detach the wheel speed sensor wiring harness from the wheel knuckle and floor panel.
1. Disconnect the electrical connector.
2. Detach the clips.
4. CAUTION: Do not damage the wheel speed sensor wiring harness or electrical connector.
NOTE: The wheel speed sensor wiring harness is routed through the wheel knuckle.
Remove the wheel spindle and wheel hub assembly from the wheel knuckle.
Vehicles without anti-lock brakes
5. Remove the wheel spindle and wheel hub assembly.
