Focus L4-2.0L SOHC VIN P (2000)
8. NOTE: Carry out this process on both the front brake lines. Drain the brake fluid reservoir.
1
Connect a bleed tube to the bleed nipple and into a suitable container.
2
Pump the brake pedal until no more fluid is expelled.
3
Tighten the bleed nipple.
9. Lower the vehicle.
10. Install the brake fluid reservoir cap.
11. Remove the air cleaner.
12. Remove the air cleaner outlet tube.
13. Disconnect the central electrical box electrical connector.
14. Remove the central electrical box retaining screw.
15. Detach the central electrical box.
^
Relocate to the air cleaner position.
