Focus L4-2.0L SOHC VIN P (2000)
3.
Disconnect the canister purge outlet tube and move it out of the way. See Figure 1.
4.
Disconnect the electrical connector from the speed control servo. See Figure 2.
5.
Remove the three (3) speed control servo retaining nuts. See Figure 2.
SPEED CONTROL SERVO REMOVAL
6.
Disconnect the electrical connector from the brake master cylinder reservoir.
7.
Remove the brake master cylinder reservoir retaining screws and move the reservoir aside.
8.
Remove the servo and place the servo on a bench.
SPEED CONTROL SERVO INSPECTION