Focus L4-2.0L SOHC VIN P (2000)
16. Remove the timing belt.
1. Use an 8 mm Allen wrench and turn counter clockwise 1/4 turn.
2. Insert a 3 mm (1/8 inch) drill bit to lock the timing belt tensioner in place.
-
Remove the timing belt.
Installation
1. Check the alignment of the timing mark on the crankshaft timing belt pulley.
2. Check the alignment of the timing mark on the camshaft timing belt pulley.
3. Install the timing belt.
1. Install the timing belt over the pulleys in a counter clockwise direction starting at the crankshaft.
-
Keep the belt span from the crankshaft to the camshaft tight while installing the timing belt over the camshaft.
2. Remove the 3 mm (1/8 inch) drill bit to release the timing belt tensioner.
