ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Mechanical Specifications|Page 7938 > < Mechanical Specifications|Page 7936
Page 1
background image

Condenser HVAC: Service and Repair

REMOVAL

NOTE:  Observe the "Health and Safety Rules".

1. Perform the Refrigerant Discharging and Recovery Procedure.
2. Raise the vehicle.

3. Detach the radiator undershield.

NOTE: Do not drain the cooling system.

4. Disconnect the refrigerant lines from the condenser.

5. Loosen the radiator crossmember (left-hand side shown).

-

Remove two bolts on each side.

CAUTION:  Support the radiator crossmember using a transmission jack or similar.

Mechanical Specifications|Page 7938 > < Mechanical Specifications|Page 7936