Focus L4-2.0L SOHC VIN P (2000)
Refrigerant Pressure Sensor / Switch: Service and Repair
REMOVAL
1. Remove the activated charcoal canister cleaning solenoid valve (if equipped). For additional information, refer to Evaporative Emissions System.
-
Remove two bolts and lay the solenoid valve to one side.
NOTE: Observe the "Health and Safety Rules".
2. Disconnect the low pressure switch connector.
A/C Low Pressure Switch Connector
3. Bypass the plug contacts for the air conditioning low pressure switch.
-
Start the engine and switch on the air conditioning.
-
Let the engine idle for 30 seconds.
-
Switch off the engine.
CAUTION:
Make sure that the air conditioning system is filled, otherwise it will be irreparably damaged.
