Focus L4-2.0L SOHC VIN P (2000)
5. Remove the lower driver's side footwell trim.
6. Unclip and remove the air distribution Bowden cables.
7. Unclip and remove the temperature control Bowden cables.
-
Unclip and remove the temperature control Bowden cables.
INSTALLATION
1. Install the components in reverse order.
NOTE:
-
Route the new Bowden cables without kinks and check for easy accessibility.
-
To install the Bowden cables, turn the rotary switches as far as they will go to the left. The mechanism engages easily in this position.
-
The Bowden cables are identical for RHD and LHD vehicles, although they are fastened to the air flap operating mechanism with the reverse
side of their connectors.
2. Check operation of the Bowden cables.
