ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

High Beam Relay > < Diagram Information and Instructions|Page 10168
Page 1
background image

Headlamp Switch: Service and Repair

REMOVAL

1. Remove the lower driver's side footwell trim.

CAUTION:  Disconnect the battery ground cable. For additional information, refer to Battery.

2. Detach the lamp switch bezel.

^

Remove two screws.

3. Remove the light switch.

^

Remove three screws.

^

Disconnect the electrical connectors.

INSTALLATION

1. Refit the components in reverse order.
2. Check the operation of the light switch, headlamp levelling, instrument panel illumination dimmer and light switch illumination.

High Beam Relay > < Diagram Information and Instructions|Page 10168