Focus L4-2.0L SOHC VIN P (2000)
Parts will not be direct shipped for this program. Order your parts requirements through normal order processing channels.
For questions regarding this program contact Parts Support Center.
DEALER PRICE
For latest prices, refer to DOES II.
PARTS RETENTION AND RETURN
Follow the provisions of the Warranty and Policy Manual for "Parts Retention and Return Procedures".
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
OVERVIEW
This program is being supplemented because the service parts originally supplied for this program (redundant wheel retention cap and bolt) are no longer
available and the inspection to identify loose or damaged parts is no longer required. The service procedures and parts from Customer Satisfaction
Program 01B85-S2 are being utilized in their entirety for this supplement.
This document details the procedure for:
^
Drum brake equipped vehicles: Installing new wheel bearings and water seal carriers onto both rear wheel hubs and installing a double-lip water seal
onto both rear wheel spindles.
^
Disc brake equipped vehicles: Installing new wheel bearings and water seal carriers onto both rear wheel hubs and installing new wheel spindles
equipped with double-lip water seals.
